Finger Clip Type Cxygen Saturation Detector (THR-OSD001)

• Classification: Imaging Diagnostic Equipment
• Type: Patient Monitor
• Certification: CE
• Group: Patient
• Applicable Parts: Finger
• Power off: Auto Power -off
• Model NO.: THR-OSD001
• Display Mode: OLED
• Oxygen Saturation Showed: 70-100%,±2%
• Size: 58*32*34mm
• Net Weight: Net Weight
• Certificate: Ce and ISO
• Transport Package: Standard Carton with Foamed Plastic to Protect The
• Trademark: THR
• Origin: Jiangsu

Product Description

THR-OSD001 Finger clip type oxygen saturation detector

Main Features
1.Small and portable one key to measure simple fashion appearance, round feel, blood oxygen detection anytime and anywhere.
2.Silicone finger mode is more comfortable to wear.The soft characteristic of silica gel is combined with ergonomics, which means that the mold is formed with one bond and the bonding is good.
3.The four directions are clearer.Human detail design, different gestures, different directions, can accurately read.
4.Automatic shutdown USES more energy saving, automatic detection finger position, no fingers after 8 seconds automatic shutdown, energy saving power, lasting standby.

Main performance
Display mode:OLED display
Oxygen saturation showed:70-100%,±2%
Size:58*32*34mm

net weight:54g
Pulse frequency display: 25-250BPM,± 1% or ± 1BPM
The power consumption:Less than 30MA

Directions for use

1.Install two 1.5V batteries and cover the battery cover according to the positive and negative signs in the battery tank;

2.Pinch the finger clip pulse oximeter clamp, insert the finger into the rubber channel (the finger should be fully extended) then loosen the clamp, and click the switch button of the front panel.

3.Don't quiver with your fingers during use, and the body should not be in motion to read accurate data.

Switch the interface direction by default button mode, press the button (less than 2 seconds), and the switch can be fixed in 4 directions.

4.8 seconds automatic shutdown without finger induction.