| Customization: | Available |
|---|---|
| Material: | Plastic |
| Type: | Multi-Function Chair |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Instructions for Infusion Orange
I. Product name: Infusion chair (length 104cm, height 120cm, width 80cm)
Il Structure composition: (pictured)
1, backrest 2, chair surface 3, chair legs 4, debris basket 5, footrest 6, infusion stand 7, tie rod 8, horizontal support
III. Installation method:
Step 1: Connect the legs of the chair with cross braces. Note (8x60mm) is not strong.
Step 2: Connect the scat surface of the chair with the screw holes on the legs on both sides.
Note (8x40mm) is not strong.
Step 3: Place the backrest of the chair flat on the seat surface, connect the angle adjusters on both sides of the seat surface with the screws (8x40mm) and be
firm, move the angle adjuster wrench and use the car to lift the backrest to keep it upright. Step 4: Use a small lever to connect the screw holes of the footrest and the backrest, respectively, front
8x25mm, after 8x40mm, note that it is not fastened, and there is a movement gap, otherwise the backrest movement is restricted
Step 5: Strengthen the chair legs and the screws on the chair surface, install the debris basket, insert the infusion stand, and use it after the overall inspection.
IV, matters needing attention:
This product should be stored in a cool, clean, dry place, away from heat sources, and not close to sharp objects.
V, transportation
The packaged products can be transported by general means of transportation. During transportation, attention should be paid to sun protection, rain and snow,
and must not be mixed with toxic, harmful or corrosive materials.
VI. Storage:
The packaged products should be placed in a dry, well-ventilated room with no corrosive materials and no heat sources around
| application | Hospital, Clinic |
| design style | Modern |
| material | GENUINE LEATHER,METAL |
){kind=link}